Hexagonal Bar weight calculation formula
Quick answer: Hexagonal bar weight (kg/m) = 0.866 × s² × density factor, where s is the size across flats in mm. Shortcuts: steel s² × 0.0068, brass s² × 0.00736, copper s² × 0.00776, aluminium s² × 0.00234. Example: a 24 mm steel hex bar!-->!-->…
Aluminium Tube Specification
Quick answer: Aluminium tube comes in round, square, rectangular and oval shapes, mostly in alloys 6063-T5/T6 (architectural) and 6061-T6 (structural). It weighs about a third as much as steel (2,700 kg/m³), resists corrosion, and is!-->!-->…
BRC Mesh weight chart
Quick answer: BRC mesh is welded steel reinforcement mesh sold in 2.4 × 4.8 m sheets (11.52 m²). Common square meshes weigh about A142 = 2.22 kg/m², A193 = 3.02 kg/m², A252 = 3.95 kg/m² and A393 = 6.16 kg/m², so an A193 sheet weighs about!-->!-->…
Unequal Angle weight chart
Quick answer: MS unequal angle weight (kg/m) = t × (a + b − t) × 0.00785, where a and b are the legs and t the thickness in mm. Example: a 75 × 50 × 6 mm unequal angle weighs about 5.6 kg/m, or 33.6 kg for a 6 m length.
Buying MS angle!-->!-->!-->!-->…
Top 10 steel factory in UAE
Top 10 steel factories in the UAE: leading steel manufacturers, products and capacity. Find trusted steel suppliers in Dubai and across the UAE.
Chequered Plate
Quick answer: Chequered plate (checker or tread plate) is steel or aluminium plate with a raised diamond or teardrop pattern for slip resistance. MS chequered plate is usually 3–10 mm thick in 1.25 × 2.5 m or 1.5 × 6 m sheets. It is!-->!-->…
European Standard IPN Profiles
Quick answer: IPN beams are European standard I-sections with tapered (sloping) inner flanges, named by height in mm. Example: IPN 200 is 200 mm deep, 90 mm wide and weighs about 26.2 kg/m. IPN is heavier than IPE of the same height and is!-->!-->…
Gost Channels
Quick answer: GOST 8240 channels are named by their height in centimetres: No. 10 is 100 mm high, No. 20 is 200 mm. The suffix U (У) means tapered flanges and P (П) means parallel flanges. They are similar to European UPN channels of the!-->!-->…
European Standard HEB (IPB) Beam Profiles
Quick answer: HEB (IPB) beams are European wide-flange H beams to EN 10365 with height equal to the nominal size. Example: HEB 200 is 200 × 200 mm, web 9 mm, flange 15 mm and weighs 61.3 kg/m (735.6 kg per 12 m). HEB is used for columns,!-->!-->…
European Standard HEA (IPBL) Beam Profiles
European standard HEA (IPBL) beam profiles: sizes, dimensions and weight per metre in a clear chart. Steel beams available in Dubai, UAE.
European Standard IPE Beam Profiles
Quick answer: IPE beams are European parallel-flange I-beams to EN 10365, named by height in mm. Example: IPE 200 is 200 × 100 mm, web 5.6 mm, flange 8.5 mm and weighs 22.4 kg/m (268.8 kg per 12 m). IPE is efficient in bending and used for!-->!-->…